Every year produces a stack of “future of casting” articles built on opinion. This one starts from published data instead: the Investment Casting Institute’s 2024 market report (released September 2025), the China Foundry Association’s 2024 output figures (June 2025), and the European Investment Casters’ Federation’s 2025 conference assessment (May 2025).
Those sources agree on the headline: demand is not rising or falling evenly. It is moving between segments, regions and process capabilities. Five forces explain most of that movement between now and 2028. For each one, this article states what the data shows, what it means for a buyer, and what to watch.
Force 1: Demand Tilts Toward High-Value Castings
The ICI report puts global investment casting sales at US$17.2 billion in 2024. Within that total, high-value castings for aerospace, defense and industrial gas turbines reached US$11.24 billion — about 65% of all sales. North America accounted for US$6.16 billion of that high-value block, Europe US$3.36 billion and China US$1.15 billion; together those three regions made up 94% of global high-value revenue.
That concentration is the first force. The segment with the most demanding qualification requirements is also the segment where most of the money sits, and it is where capacity gets booked first.
What it means for buyers: if your part is an aerospace bracket, a defense component or a hot-section turbine part, you are competing for the same constrained capacity as every other OEM program. If your part is a general-industry pump or valve casting, you are buying into a much more competitive pool. Both are investment castings. Neither should be sourced with the same strategy. Every qualification debate eventually becomes a defect debate, and our defect reference maps the rejection modes buyers actually raise to their causes.
What to watch: OEM backlogs and aircraft-build rates. The ICI report notes that aircraft production has rebounded but that OEMs still face supply-chain bottlenecks — a factor that can delay programs even when casting capacity exists.
Force 2: Energy Transition and Data-Centre Power
The second force runs through the industrial gas turbine. The ICI report describes IGT castings as having grown moderately in 2024, with demand possibly softening in 2025 as power-sector investment normalises — but it also calls the long-term outlook bullish, specifically because AI-driven data centres are increasing demand for efficient, dispatchable energy.
Turbine hot-section components are among the hardest castings to make, and the alloys they require — nickel and cobalt superalloys — sit at the top of the material difficulty curve. Our materials guide covers grade selection and where cross-standard equivalents break down.
What it means for buyers: if you supply turbine or power-generation components, your demand outlook is now partly tied to data-centre capital spending rather than only to aerospace cycles. That is a different forecasting problem, and it argues for closer communication with your foundry about alloy supply and capacity reservations.
What to watch: data-centre power investment, IGT order books, and any change in energy policy that affects gas-turbine build rates.
Force 3: Reshoring and Supply-Chain Resilience
The ICI report explicitly frames reshoring, sustainability mandates and energy transitions as forces reshaping the landscape. The EICF’s 2025 conference went further, building its program around supply-chain security and describing the investment casting sector as key to European industrial sovereignty.
At the same time, the same ICI report notes that in general industry — pumps, valves, oilfield equipment, industrial machinery — demand is under pressure as buyers gravitate toward lower-cost suppliers. Resilience and price are pulling in opposite directions at the same time.
What it means for buyers: the market is separating into two purchasing logics. High-value programs pay a resilience premium for qualified capacity close to the end user; general-industry programs still optimize on landed cost. A single sourcing strategy applied to both will be wrong for one of them.
What to watch: tariff and trade-policy changes (they move faster than supplier qualification), defense-spending decisions, and whether regional qualification programs actually shorten lead times.
Force 4: The Digitalisation of the Foundry
The ICI report points to leading producers adopting digital transformation — advanced automation, 3D printing for pattern making, and digital quality-control systems. That is not a future scenario; it is already the competitive baseline for high-value work.
The practical effect is on iteration speed and evidence quality. 3D-printed patterns compress the tooling loop for prototypes and low-volume parts; digital QC systems make dimensional and process data retrievable rather than filed on paper. The process scope behind that data is set out on our precision casting services page.
What it means for buyers: the qualification conversation is shifting from “can you make it?” to “can you show me the data?”. Suppliers who can hand over capability studies, dimensional data and traceability records will win work that used to go to whoever quoted fastest. Buyers should ask for data earlier, not after the first rejection.
What to watch: digital product passports and traceability requirements (policy details are still evolving and should be verified before contractual use), and how quickly digital QC becomes a stated requirement rather than a differentiator.
Force 5: China’s Supply Base Is Consolidating
China produced 50.75 million tons of castings in 2024, down 2.2% year on year, according to the China Foundry Association. The material mix is shifting too: grey iron fell to 40.6%, ductile iron to 27.5%, steel castings held at 12.4%, and aluminium/magnesium castings rose to 16.4% on the back of lightweight vehicles and new energy vehicles. Automotive remains the largest downstream user at 29.7% of demand.
Two cautions before drawing conclusions. These figures cover all casting processes, not investment casting alone. And a fall in total tonnage does not mean every segment shrank — it means the market is re-weighting. We covered the earlier part of this cycle in our 2025 review of silica-sol casting industry dynamics.
What it means for buyers: China remains the deepest pool of general-industry casting capacity, but it is consolidating. Fewer, more capable suppliers means better process control per supplier and less appetite for small, low-margin jobs. Buyers running low-volume programs should expect higher minimum quantities or higher per-piece prices from the surviving suppliers — and should plan accordingly rather than assume historical pricing persists.
What to watch: supplier exits and consolidation, environmental-policy enforcement, and the pace of the aluminium/magnesium shift.
What Buyers Should Do Differently
- Map suppliers to segments, not to a single price benchmark. High-value and general-industry capacity behave differently in lead time and negotiation.
- Ask for process capability data up front. Tolerance bands, Cpk studies, material certificates and NDT plans should be part of the first technical exchange; our data sheet lists the dimensional and material bands we publish.
- Treat quoted lead time as a capacity signal. In a split market, unusual speed or unusual delay both carry information.
- Budget qualification time for high-value parts. Dual-sourcing them is a program, not a second quote.
- Lock material specifications before comparing prices. Alloy and certification requirements move the cost stack more than geography does.
What This Article Does Not Claim
- All figures are 2024 actuals or 2025 outlook statements from the cited institutions. No 2026 or 2027 actual figures are asserted, because the sources reviewed do not publish them.
- No compound annual growth rate is quoted. Producing one would require a market model, not a news summary.
- Tariff rates and digital-product-passport timelines change quickly; verify them against the current official document before using them commercially.
FAQ
Is the investment casting market growing? It depends on the segment. The ICI outlook expects aerospace, defense and IGT demand to remain strong, automotive demand to stay stable, and general-industry demand to remain under pressure. A single growth number hides that split.
Will China remain the largest supplier of investment castings? China’s 2024 output of 50.75 million tons (China Foundry Association) makes it the deepest supply base, and its investment casting sales reached US$3.58 billion in 2024 (ICI). Whether that share holds is a policy and capacity question, not something this data can settle.
What is the biggest risk for buyers through 2028? Segment mismatch: sourcing a high-value part through a general-industry-oriented supply chain, or judging high-value suppliers by general-industry prices. Most sourcing failures start there, and both the price benchmark and the qualification effort go wrong together.
How often should a sourcing strategy be reviewed? Annually at minimum, and whenever tariff policy or material availability changes. The underlying data in this article is annual, so decisions should be revisited when the next annual dataset is published.
Sources
- Investment Casting Institute (ICI), World Report on Investment Casting, published 11 September 2025, summarised by Foundry-Planet: https://www.foundry-planet.com/d/world-report-on-investment-casting (2024 sales data and 2025 outlook)
- China Foundry Association, China Foundry Industry Data of 2024, published 23 June 2025, via expochina.cn: https://www.expochina.cn/en/expo/100011/news_view/10007168
- EICF 2025 Conference in Liverpool, Foundry-Planet, 13 May 2025: https://www.foundry-planet.com/d/eicf-2025-conference-in-liverpool-investment-casting-sees-above-average-growth/
Data note: every figure in this article is attributed to one of the three sources above, with the publication year stated. Claims that could not be sourced are described qualitatively or excluded.