Investment Casting Market in 2026: The $17.2 Billion Split Buyers Should Read

If you buy castings, 2026 is not a “market recovery” story. It is a market split.

The most recent full-year dataset from the Investment Casting Institute (ICI), published in its World Report on Investment Casting in September 2025, puts global investment casting sales at US$17.2 billion in 2024. Most coverage stops at that number. For a buyer, it is actually three different markets moving in three different directions: high-value castings for aerospace, defense and industrial gas turbines (IGTs); automotive castings; and general industry castings.

That distinction decides your price, your lead time and your negotiating position more than the process itself does. This article breaks the 2024 data down by segment and region, adds China’s 2024 foundry output figures, and translates both into practical sourcing rules for the next twelve months.

One Industry, Three Markets

The ICI report splits 2024 global sales into three blocks, and the split is stark.

High-value castings — aerospace, defense and IGTs — reached US$11.24 billion in 2024, about 65% of total sales. North America accounted for US$6.16 billion, Europe US$3.36 billion and China US$1.15 billion. Together those three regions made up 94% of global high-value casting revenue.

Automotive castings totaled US$1.70 billion in 2024. Europe led with US$468 million, China followed at US$410 million and North America at US$330 million; the three regions accounted for 71% of global automotive casting sales.

General industry castings — pumps, valves, oil and gas, medical devices, transportation and non-aerospace military hardware — totaled US$4.27 billion in 2024. China led with US$2.02 billion, followed by North America at US$850 million and India at US$450 million; these three countries accounted for 76% of global general industry sales.

Read those blocks side by side and the buyer’s lesson is immediate: the same process, “investment casting,” sits in a seller’s market in one segment and a buyer’s market in another.

Where Growth Is, and Where It Is Flat

By region, North America led 2024 with US$7.34 billion in casting sales, nearly 43% of the global market, and 84% of North American sales came from high-value applications. Europe followed at US$4.21 billion, with high-value applications again dominating its mix. China reached US$3.58 billion, and 56% of its sales were general industry castings — medical devices, oil and gas, and non-aerospace military components.

The direction of travel matters as much as the totals. At the EICF 2025 conference in Liverpool in May 2025, EICF Chairman Dr. Julio Aguilar (Safran) stated that despite economic uncertainty in Europe, the investment casting industry is experiencing above-average growth — evidence, in his words, of the sector’s technical and economic relevance.

The ICI report is more specific about where that growth does and does not live. It expects aerospace, defense and IGT demand to stay strong through 2025, supported by OEM backlogs, energy demand and global military investment, while automotive demand remains stable rather than growing. General industry is the weak spot: the report describes demand for pump, valve, oilfield and industrial machinery castings as under pressure as infrastructure investment slows and buyers gravitate toward lower-cost suppliers.

For a buyer, an important nuance: “general industry is flat” is not the same as “everything is cheap.” It means capacity is available and price competition is real in that segment — while high-value capacity stays booked.

What China’s 2024 Numbers Add

China’s supply side looks different from its demand-side reputation. According to the China Foundry Association’s 2024 data, released in June 2025, China produced 50.75 million tons of castings in 2024, down 2.2% year on year. Automotive remained the largest user of castings at 29.7% of demand. By material, grey iron accounted for 40.6%, ductile iron 27.5%, steel castings 12.4% and aluminium/magnesium castings 16.4%, the last lifted by lightweight vehicles and new energy vehicles.

Two caveats keep this honest. First, these figures cover all casting processes, not investment casting alone — they describe the supply base, not the segment. Second, a 2.2% fall in total tonnage does not mean every sub-segment shrank; it means the market is re-weighting toward higher-value and lighter parts while commodity volume softens.

The practical read: China remains the deepest pool of general-industry casting capacity, and that pool is consolidating. For buyers, consolidation usually means fewer, more capable suppliers — better process control per supplier, but less willingness to quote small, low-margin jobs.

Five Sourcing Rules for a Split Market

1. Benchmark against the right segment. A per-kilogram price from a general-industry pump casting tells you nothing about what an aerospace bracket should cost. Build separate benchmarks: general industry (capacity-rich, price-competitive), automotive (stable demand, platform-specific), high-value (capacity-constrained, qualification-heavy). If your RFQ is being compared against the wrong benchmark, you will either overpay or scare off capable suppliers.

2. Read lead time as a segment signal. When aerospace and defense backlogs stay strong, high-value slots fill first. General industry capacity is the opposite: more open, more negotiable. If a supplier quotes a surprisingly short lead time for a high-value part, ask what capacity it is holding and for which segment — the answer is diagnostic.

3. Qualify the process, not just the price. In a split market, the cheapest quote often comes from a supplier optimized for a different segment. Ask for the documents that prove the process: dimensional tolerance capability to ISO 8062, minimum wall thickness for your alloy, material certificates to EN 10204 3.1 or 3.2, and a documented NDT plan. Our investment casting data sheet lists the tolerance bands, minimum wall thickness and surface finish we hold for stainless, alloy steel and superalloy parts; the materials page covers grade selection and cross-standard equivalents.

4. Dual-source deliberately. General industry is where dual-sourcing is easiest and most valuable right now, because capacity exists. For high-value parts, dual-sourcing is a qualification program, not a price tactic — budget time for sampling and approval, not just a second quote. If you are moving a part between suppliers, this cost model gives a first-pass estimate of the piece price before you open a formal RFQ.

5. Ask for data you can audit. The 2024 dataset is a market-level average. Your part is not an average. Ask for dimensional capability data (Cpk) on comparable parts, defect rates on the specific process route, and traceability from heat number to finished part. Suppliers who can answer those questions are the ones that survive consolidation.

Where the Dongguan Cluster Fits

Xinyouyuan is an investment casting foundry in Dongguan, China, running the lost-wax process with silica sol shells for stainless steel, alloy steel, nickel and cobalt alloys. That places the plant squarely in the general-industry and precision-parts segment that the ICI data describes as capacity-rich and price-competitive — and it is exactly why process data, not marketing copy, should decide whether a supplier is a fit. You can see the service scope on our precision casting services page, the defect taxonomy in our defect reference, and the background on our about page.

What to Watch Over the Next 12 Months

Four signals are worth tracking, based on the ICI outlook published in September 2025:

  • Aerospace and defense backlogs. Strong OEM backlogs and military spending are the main support for high-value demand. Aircraft OEM supply chain bottlenecks remain a risk in the other direction.
  • IGT demand tied to data centres. The ICI report links long-term IGT demand to AI-driven data centre power needs, while noting that 2025 demand may soften as power-sector investment normalises.
  • European defense spending. It is described as politically sensitive and unevenly distributed — a growth driver with a lumpy profile.
  • Trade policy and tariffs. Tariff changes affect landed cost faster than they affect list price. We are not quoting specific tariff rates here because they change; verify the current rate for your HS code before comparing suppliers on price.

FAQ

How big is the investment casting market in 2026? The most recent full-year figure available in the sources reviewed is US$17.2 billion for 2024, published by the Investment Casting Institute in September 2025. Figures for 2025 and 2026 were not published in the sources reviewed, so we do not extrapolate them.

Is the investment casting market growing? It depends on the segment. The ICI outlook expects aerospace, defense and IGT castings to stay strong, automotive to remain stable, and general industry to stay under pressure. A single “market growth” number hides that split.

Why are Chinese castings often cheaper? Scale is part of it: China produced 50.75 million tons of castings in 2024 and supplied US$2.02 billion of the world’s US$4.27 billion general industry investment casting segment. The ICI report also notes buyers shifting toward lower-cost suppliers in general industry. Price differences should still be checked part by part, because material, tooling and inspection requirements move the cost stack more than geography does.

What tolerances can investment casting hold? Tolerance bands depend on alloy, part size and the specific dimension. The governing framework is ISO 8062; our published data sheet lists the bands we hold in production.

Should I dual-source in 2026? For general industry parts, capacity is available and dual-sourcing is relatively easy. For high-value parts, treat a second source as a qualification project with sampling and approval time, not as a quick price check.

Sources

  • Investment Casting Institute (ICI), World Report on Investment Casting, published 11 September 2025, summarised by Foundry-Planet: https://www.foundry-planet.com/d/world-report-on-investment-casting (2024 sales data)
  • China Foundry Association, China Foundry Industry Data of 2024, published 23 June 2025, via expochina.cn: https://www.expochina.cn/en/expo/100011/news_view/10007168
  • EICF 2025 Conference in Liverpool, Foundry-Planet, 13 May 2025: https://www.foundry-planet.com/d/eicf-2025-conference-in-liverpool-investment-casting-sees-above-average-growth/

Data note: all figures above are 2024 actuals or 2025 outlook statements as published by the cited institutions. No 2026 figures are asserted in this article.

Scroll to Top