About Xinyouyuan Investment Casting

Xinyouyuan (Dongguan) works with partner foundries in Guangdong and Hebei: investment casting of 304/201/316/303 stainless, plus carbon and low-alloy steels, with in-house spectro checks per heat and dimensional records. Address: Dongguan, Guangdong, China. The parts we ship go into marine hardware, automotive and motorcycle assemblies, medical instruments and industrial machinery.

What we actually do

We are not a trading company with a foundry partner. The wax dies are cut here, the shells are built here, and the melt is poured here. That matters for one reason: when a casting fails a pressure test, there is no third party to blame and no week lost in the middle of the chain.

Process scope

  • Silica sol shell, 4.5 to 8.5 coats depending on section and tolerance
  • Steam autoclave dewaxing with a controlled pressure ramp
  • Medium-frequency induction melting with in-house spectro analysis of every heat
  • Solution annealing, normalising and precipitation hardening
  • Gate removal, grinding, shot blasting, passivation on request

Materials we run regularly

  • 304/201/316/303 stainless, plus carbon and low-alloy steels (WCB, WCC, 4140, 42CrMo)
  • Other grades evaluated per drawing

Where our work goes

Four industries, each with a different definition of failure. Marine and pump hardware fails by leaking. Automotive brackets fail by fatigue. Medical instruments fail by being out of tolerance. Industrial wear parts fail by wearing out early. We gate and inspect differently for each, which is why we ask what the part does before quoting it.

How we handle quality

Inspection is planned at quotation, not added at the end. The drawing tells us which dimensions are critical, and those get measured on every lot; the rest are sampled. Where a part has a pressure-tightness or third-party testing requirement, that is agreed before the wax die is cut, because a gating design that passes a visual check will not necessarily pass a hydrostatic test.

In-house spectro report per heat + dimensional records ship with the lot; third-party testing quoted per project. If a customer wants to audit the process route, we would rather they did it before the first production run than after the first rejection.

What we publish, for free

Two references for the trade, both written by our own engineers and given away without registration:

  • ProCAST for Casting Process Simulation — a practical handbook on running casting simulation in ProCAST, published by China Water & Power Press.
  • Atlas of Defects in Investment Casting — an illustrated handbook of the common defects in investment casting with causes and preventive measures, published by Hunan Science and Technology Press.

Both are available on the download page. They are the same references our own people use on the shop floor, which is the only reason they are worth reading.

How a project usually starts

You send a STEP model, a 2D drawing with the critical dimensions marked, and an annual quantity with an expected batch size. We come back with a unit price, a wax die cost, a lead time and a short list of drawing issues that will cause trouble in production. If the part is straightforward, that list is empty and the conversation is over. When it is not, better to find out before the die is cut.

Talk to an engineer, not a sales inbox

Quotations and process questions go to the same people who run the line.

Contact us

Scroll to Top